Capture and transfer up to 3000 gallons of water per hour with the compact RPV vacuum system. Features a powerful, industrial 2-stage vacuum motor. A heavy duty, stainless steel pump transfers wastewater up to 100′ away while vacuuming continues…no need to stop and dump the collection tank. It is ideal for interior and exterior facilities maintenance contractors who need to collect wash water or for restoration contractors who need to pick up large volumes of water after a fire or flood. (for use with cold water or hot water up to 200°F)
| Model Number | RPV30E1 | RPV30E1 |
|---|---|---|
| POWER REQUIREMENTS | Requires: 115v/ 15 amp or 3500 Watt generator | Requires: 115v/ 20 amp or 5000 Watt generator |
| POWER CORD | 35′ GFCI power cord included | 35′ GFCI power cord included |
| HOPPER | Polyethylene, Hexagonal tank, 26 gallon capacity | Polyethylene, Hexagonal tank, 26 gallon capacity |
| PORTABILITY | Optional caster wheel kit or dolly style wheel kit available for increased mobility | Optional caster wheel kit or dolly style wheel kit available for increased mobility |
| DEBRIS STRAINER | Easy to clean strainer basket for pump protection | Easy to clean strainer basket for pump protection |
| RECOVER & TRANSFER | 30gpm | 50gpm |
| PUMP OUT | High water level vacuum tank protection – 1″ sludge/solids drain | High water level vacuum tank protection – 1″ sludge/solids drain |
| PUMP | Stainless, heavy duty transfer pump with panel mounted on/off switch | Stainless, heavy duty transfer pump with panel mounted on/off switch |
| VACUUM MOTOR | 2 stage, 100 cfm, 91″ sealed lift vacuum | 2 stage, 106 cfm, 106″ sealed lift vacuum |
| CONTROL PANEL | Easy to use, lighted on/off switches | Easy to use, lighted on/off switches |
| INLET | Requires 2″ diameter vacuum hose | Requires 2″ diameter vacuum hose |
| OUTLET | 2″ diameter discharge hose recommended | 2″ diameter discharge hose recommended |
| WARRANTY | One Year Accessory Warranty | One Year Accessory Warranty |
| WEIGHT | 56 lbs. | 56 lbs. |
| DIMENSIONS | 38″ tall x 17″ wide | 38″ tall x 17″ wide |
*Specs calculated using 25′ of 2″ vacuum hose and 50′ of 2″ discharge hose. Consistent air introduction at the pickup is
needed to prevent hydraulicing.
